We tend to prioritize comfort above everything else, and rightfully so. After all, why do you have to spend the better part of your days seated at a desk on a chair? You’d want to be the most comfortable possible. But alas, the most carefully chosen chair tends to start sinking after a year or less.
So why does my desk chair keep going down, you ask? Even though many chairs can look as good as new in shape and function, the sinking motion inevitably appears in each. The good news is that you’re not alone, and many of our customers at Giorgi Bros come looking for desk chairs that won’t sink.
Below, we will discuss why your desk chair San Francisco goes down when you’re caught in the thick of work.
Understanding the Workings of a Chair
There is a mechanism known as pneumatic that facilitates the function of a desk chair. Those familiar with heavy machinery will know that hydraulics and pneumatics are their most common features. These two systems rely on compressed air to create movement in furniture pieces, like desk chairs.
This machinery must have a consistent supply of compressed air, for which they need an air compressor. When the compressor sucks air in, it must store it in a tank or receiver. From there on, the compressed air moves through a series of valves and pipes to power the movement in the machinery.
Hydraulic systems have the exact mechanism, but instead of compressed air, they need oil to facilitate the movement. This is why most desk chair manufacturers prefer the pneumatic system, which is cheaper, cleaner, and lighter.
The modern desk chairs at Giorgi Bros, such as the Brookhaven desk chair, Breve desk chair, and others, are a genius production you’ll see. Instead of changing seating arrangements manually, the manufacturers use the pneumatic element to enable easy adjustment for seaters.
Our modern desk chairs have a singular-acting cylinder that uses air to lower or adjust the chairs. Hence, the next time you want to know why my desk chair keeps going down, know that the problem lies in its cylinder.
Helpful Tips
Nobody likes to work for hours at a desk chair San Francisco that keeps going down. Instead of complaining about why my desk chair keeps going down, you should learn a few helpful tips to prevent it.
Below are some of the tried and tested ways of stopping office chairs from sinking.
1. Lubrication
Sometimes, it is just the increase of friction in the components that could be causing the desk chairs to sink. Hence, lubrication might be a helpful solution, just as it would be for squeaky chairs. The fact is that when all components of a chair are in fine working order, they tend to provide excellent performance.
But the regular usage of a chair can wear those components out within a period. You can verify if the cause of your sinking chair is indeed a lack of lubrication. For this, you must check if the lever controlling the height of your chair failed to elevate the furniture item to your desired level.
The act of sinking can often be the accumulation of rust. You see, all offices and workplaces generally have air conditioners running throughout, thus increasing the presence of moisture. The latter, combined with air, are the most common causes of rust in desk chairs.
To counteract this problem, you only need to lubricate the components to keep your chair working perfectly for a long.
2. Duct Tape and Hose Clamps
If you’re looking for a quick fix for your beloved desk chair, you can do that with a few common elements. First, you will need a roll of duct tape, although you won’t use it all. Then you will also need a few hose clamps on hand to stabilize your sinking office chair.
To ensure this DIY hack works for your desk chair, make sure you have hose clamps in size 20. Next, take your hose clamp and place it around the cylinder piston at a height that suits you. Also, we recommend choosing a height that wouldn’t make you want to adjust the height repeatedly.
The clamp will act as a stop, while the duct tape will help prevent the clamp from sliding. However, it is essential to note that this DIY hack is only a temporary solution; after a few days, your chair will begin to slide again.
3. Try a Jubilee Clamp
Now, if you don’t have hose clamps or duct tape lying handy but have jubilee clamps, you could use those as a DIY fix for your sinking desk chair. Start by unscrewing the tiny bolt on your clamp screw and wrapping it around your chair’s metallic cylinder.
Once you have set it around the cylinder, try to bring it right in the middle position but don’t replace the bolt already. Find a good portion of duct tape and wrap it all over the cylinder’s top part.
The duct should go directly above the clamp to provide a secure grip for your just-installed clamp. Once you have followed these steps, you can sit back assured that your chair won’t sink for a while, at least now.
Final Thoughts
When you want to know why my desk chair keeps going down, you may want to look at its cylinder. If it shows a slight problem, you may be able to fix it with a few DIY hacks and handy items at home.
You can find qualitative, non-sinking, and highly comfortable desk chairs at Giorgi Bros.
Proudly serving Menlo Park, Los Gatos, Mill Valley, San Anselmo, Oakland, San Jose, San Mateo, Redwood City, Alameda, San Ramon, and the surrounding areas.